Clipsal 5500PC Cbus PC Interface

C-Bus 5500PC
Clipsal CBus PC Interface

The PC Interface is a C-Bus device designed to provide an isolated, bi-directional, interface between serial RS232 and the C-Bus network. Through the PC Interface, C-Bus units can be programmed, commands can be issued and activity on the C-Bus network can be monitored.

The PC Interface uses a standard RS232 serial port connection and allows an external device with RS232 output to interface to the C-Bus. Installation of the PC Interface on the C-Bus network requires connection to the Category 5 unshielded twisted pair network cable. The connection to a personal computer is via the 9-pin D type serial connector or RJ45 connectors located on the unit.

C-Bus 5500PC PC Interface Technical Information
Catalogue Number : 5500PC
C-Bus Supply Voltage : 15-36VDC @ 32mA
Serial Connection : RS232, 9600bps
Electrical Isolation : 500V RMS, C-Bus/RS232
Status Indicators : Unit and C-Bus
Network Burden : Software selectable
System Clock : Software selectable
C-Bus Termination : 2 x RJ45 sockets
Serial Termination : 2 x RJ45 and 1 x DB9 sockets
Operating Temperature Range : 0?C to 45?C
Operating Humidity Range : 0 - 95% RH, non-condensing

Product Features of the CBus 5500PC
- Provides a serial interface to the C-Bus network
- C-Bus units may be confi gured, monitored or controlled via the serial connection
- Programmed variables are stored in non-volatile memory and are retained in case of loss of C-Bus power
- Designed to fi t standard 35mm top hat DIN rail, measures just 4M in size
- Designed to fi t into standard electrical switchboards
- C-Tick (Australia/New Zealand), CE (European Community) compliant

Group : Clipsal C-Bus Home Automation / Building Management Systems
Range : Clipsal C-Bus System Units
Code : C-Bus 5500PC
Description : C-Bus PC Interface / Clipsal C-Bus Interface for PC