Cbus 4 Channel Dimmer Powered

Clipsal C-Bus L5504D2A
CBus 4 Channel Dimmer Powered

The C-Bus 4 channel dimmer modules are DIN rail mounted units employing leading edge phase control circuitry for improved dimming control. They feature learn mode, local and remote overrides for on/off control, channel,C-Bus and unit status indicators.

Each dimmer channel is rated at 2 Amps and is suitable for incandescent and low voltage lighting using magnetic and leading edge compatible transformers. The dimmer output is controllable over the range of 2-98%, while frequency tracking algorithms ensure flicker-free operation and smooth dimming control.The dimmer units are available as passive and current sourcing models that source up to 200mA to the C-Bus network.

C-Bus L5504D2A Technical Information
Catalogue Number : L5504D2A
Line Supply Voltage : 220-240VAC
Supply Frequency : 47-53Hz and 57-63Hz
Frequency Drift : 3Hz/minute (maximum)
Frequency Step Change : 0.1Hz (maximum)
C-Bus Supply Voltage : 15-36VDC @ 0mA
Load Rating per Channel : 2A
Minimum Load : 15W per channel
Control Range : 2 - 98%
Compatible Loads : Incandescent and low voltage lighting.
Suitable for use with leading edge compatible electronic transformers.
C-Bus Source Current : 200mA
Maximum Number of Units on a Single C-Bus Network : 10
Status Indicators : Channel Status (8), Unit and C-Bus
Warm Up Time : 5 seconds
Network Clock : Software selectable
Network Burden : Software selectable
C-Bus Termination : 2 x RJ45 Socket
Load Termination : 2 x 1.5mm2 or 1 x 2.5mm2
Operating Temperature Range : 0?C to 45?C
Operating Humidity Range : 0 - 95% RH, non-condensing

C-Bus 4 Channel Dimmer Product Features
- Provides 4 x 2A channels of dimming control
- Programmable via the learn mode feature or using the C-Bus Toolkit Software
- Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power
- Local and remote on/off control independent of C-Bus communications
- Programmable power up state following power cycling.
- Logic states (max/min) programmable using the C-Bus Toolkit Software
- Employs frequency-tracking algorithms for smooth fl icker free operation
- Designed to fi t standard 35mm top hat DIN rail, measures just 12M in size
- Designed to fi t into standard electrical switchboards
- RCM (Australia/New Zealand), CE (European Community) compliant

Group : Clipsal C-Bus Home Automation / Building Management Systems
Range : Clipsal C-Bus Output Units
Sub Cat: Clipsal CBus Dimmers
Code : C-Bus L5504D2A
Description : C-Bus 4 Channel Dimmer Powered / Clipsal C-Bus 4 Channel Dimmer Powered