Cbus 4 Channel Changeover Relay Non Powered

Clipsal C-Bus L5504RVFCP
CBus 4 Channel Changeover Relay Non Powered

The C-Bus 4 channel changeover relay units are DIN rail mounted units suitable for switching resistive, inductive and fluorescent loads. These relay units feature learn mode, local and remote overrides for on/off control, Channel, C-Bus and unit status indicators.

Load control is provided by non-latched, changeover relays that feature both normally open (N.O.) and normally closed (N.C.) contacts. The changeover relays can be interlocked and have applications in curtain and blind controls (up/down) or 3 speed air-conditioning controls (on/off , low, medium and high). The relay units are available as passive and current sourcing models that source up to 200mA to the C-Bus network.

C-Bus L5504RVFCP Technical Information
Catalogue Number L5504RVFCP
Line Supply Voltage 220-240VAC
Supply Frequency 47-53Hz and 57-63Hz
C-Bus Supply Voltage 15-36VDC @ 0mA
Load Rating per Channel 10A resistive, 5A inductive and incandescent, 1A fluorescent
Contact Type Voltage free, normally open, magnetically latched
Switch Operations Greater than 60,000 operations
Compatible Loads Resistive, inductive, incandescent and fl uorescent
C-Bus Source Current 0mA
Maximum Number of Units on a Single C-Bus Network 100
Status Indicators Channel Status (4), Unit and C-Bus
Warm Up Time 5 seconds
Network Clock Software selectable
Network Burden Software selectable
C-Bus Termination 2 x RJ45 Socket
Load Termination 2 x 1.5mm2 or 1 x 2.5mm2
Operating Temperature Range 0?C to 45?C
Operating Humidity Range 0 - 95% RH, non-condensing

Product Features of the CBus 4 Channel Changeover / Relay
- Provides 4 channels of changeover, non-latched relay outputs
- Programmable via the learn mode feature or using the C-Bus Toolkit Software
- Programmed variables are stored in non-volatile memory and are retained in case of loss of mains or C-Bus power
- Local and remote on/off control, independent of C-Bus communications
- Programmable power up state following power cycling
- Logic states (and/or) programmable using the C-Bus Toolkit software
- Relays may be interlocked for curtain, blinds and 3 speed air-conditioning controls
- Designed to fi t standard 35mm top hat DIN rail, measures just 8M in size
- Designed to fi t into standard electrical switchboards
- RCM (Australia/New Zealand), CE (European Community) compliant