Kidde Firex KF10 Mains Powered Ionisation Smoke Alarm

This product has now been discontinued.

Kidde Firex 230v Ionisation Smoke Alarm with 9v battery backup and false alarm control.

Features & benefits.
- An Ionisation Sensing Chamber.
- A Dual Voltage Power Supply that will operate in 9V DC mode or 230V AC mode with a 9V DC Primary backup. (Battery fitted , but not connected)
- A 9V DC Alkaline Long Life Primary Battery backup that has a projected 4 year life and provides a minimum of 72 hours standby and 4 minutes in alarm at any time during this period. (NB. A fresh battery will sustain the detector for circa 3 years in AC power failure)
- 30 day Low Battery Warning Signal.
- A Full Function Electronic Test Switch.
- False Alarm Control (FAC) by way of a Hush Button. FAC quiets unwanted alarms for up to 15 minutes. LED will flash approx. every 10 seconds when FAC is activated. FAC resets automatically with double chirp notification.
- Dual Colour Multifunction LED indicator light to indicate GREEN that AC mains power is on, pulse RED once per minute on normal operation, pulse RED once per second if smoke alarm is sensing smoke, alarm horn operates. Pulse RED every 10 seconds, unit is in False Alarm Control mode. RED off, alarm horn operates, another connected smoke alarm has sensed smoke.
- An insect resistant detection chamber.
- An Automatic Reset Facility.
- Interconnection of up to 36 Firex smoke alarms either AC or AC/DC models.
- A fitted integral foam ceiling gasket for ease of installation and a dust cover for the protection of the device during installation or subsequent building works.
- Anti Tamper Locking Mechanism to secure detector to base.
- Hinged battery compartment lid with option to secure closed with anti-tamper screws.
- Central Connection Centre with non reversible plug and flying lead.
- Optional mounting pattrice (4890) and mounting pattrice with relay output (4891).
- Fully Kitemarked, complying with BS EN 14604 :2005, CE approved.
- 6 Year Guarantee.

Firex KF1 / 4870 /1240C / KF10